Kiosk Printer, Presenter and Retraction, AM Tech ATP-80KCL

Loop type presenters allow the printing of longer receipts without the ticket becoming exposed outside the kiosk. Instead it is looped up inside the presenter until after it is cut, only then is it ejected by the presenter unit. The presenters also feature a retraction function to reverse feed the receipt to be retained within the kiosk. This feature is used to safely remove receipts from the presenter if not collected by the user.
The two models in this range differ according to the paper roll capacity which is either 150mm or 250mm diameter.
An auto-cutter, roll holder and interface board (RS-232C, USB or parallel) are included on both models.

General Features

Robust Design
80mm paper width
Large diameter roll capacity (250mm)
High speed (150mm/sec)
High resolution (203 dpi: 8 dots/mm)
Easy loading straight paper path
RS-232C / USB / Parallel Interface
Autocutter - full or partial cut
Loop Presenter with retraction
Front paper exit

Applications

Applications include; larger kiosk, ticket vending machines and receipt output for gaming machines, information terminals, remote transaction systems, weighing machines, toll booth auto payments, car parking, queuing systems, ATMs, etc.

Detailed Specifications

SPECIFICATION	ATP-80KCL1	ATP-80KCL2
Printing	Direct Thermal
Characters per line	24, 36, 48, 64
Resolution	203 dpi, 8 dots/mm
Print width	3 inch (72mm, 576 dots)
Printing speed	150mm/sec
Dimensions (WxDxH)	143 x 353 x 151mm	143 x 415 x 165mm
Weight	2.6Kg	3.3Kg
Paper handling	Straight paper path, paper end & head up sensors
Presenter	Motorised, with loop facility & retraction
Interfaces	RS-232C / USB / Parallel (Centronics)
Paper size	80mm wide, 150mm diameter 240m long^*	80mm wide, 250mm diameter 680m long^*
Power	DC 24V@1.5A(25% ratio)
Barcodes supported	Code39, Code93, 2 of 5, Code128, UPC-A, UPC-E
Print head life	50km (1x10⁸ pulses)
Cutter Life	300,000 cuts
Relative humidity	20 to 90% (non condensing)
Operating temperature	0~45^oC